sinot edm spark erosion machines are providing effective and affordable edm machining with a fast payback.
  • easy to use, rigid, low cost edm
  • fine finish, low electrode wear, high removal rate
  • edm parameters and depths are programmable
  • parameters can be manually adjusted while machining
  • digital read-out and hand held remote is standard on all models
  • znc (nc controlled z axis) is optional
QUICK SPECIFICATIONS
DK-7125 DK-7135 DK-7145
Work Table
280x450 320x600 480x700
Travel XY axis
250x150 350x250 450x350
Travel Z axis
200 180+200 250+230
Overall Tank Size
780x480x300 840x555x355 1150x680x390
Min Electrode Wear
<0.3% <0.3% <0.3%
Best Surface Finish
Ra 0.8 um Ra 0.8 um Ra 0.8 um
Max Removal Rate
260mm/min 260mm/min 260mm/min
Max Power Output
30A 60/100A 60/100A